Correct use of vibration motor
- Categories:Industry information
- Author:
- Origin:
- Time of issue:2014-12-15 00:00
- Views:
(Summary description)Correct use method of vibration motor
Correct use of vibration motor
(Summary description)Correct use method of vibration motor
- Categories:Industry information
- Author:
- Origin:
- Time of issue:2014-12-15 00:00
- Views:
Information
Correct use method of vibration motor:
1. The bottom bolt needs to be checked and tightened once every 50 hours of operation.
2. You can work when you turn on the power. You need to check whether there is any problem with the steering during operation. When the steering is wrong, you can change the phase sequence of the power to change the steering of the vibration motor.
3. If abnormal conditions occur during the operation of the vibration motor, such as insufficient speed, abnormal noise, etc., the operation should be stopped immediately for inspection.
4. Rotate the eccentric blocks on both sides in the same direction to align the required excitation force scale line with the reference line at both ends of the shaft, or use a ruler to measure the distance between the opening angles of the two eccentric blocks to make the opening angles at both ends consistent, and the two motors are open The angles should be the same.
5. Remove the protective covers at both ends, and loosen the compression bolts of the adjustable eccentric block at both ends.
6. Tighten the eccentric block compression bolt, and then install the protective cover. The correct use of the method can ensure the normal operation of the machine, and the normal operation of the machine can produce high efficiency. Therefore, you must strictly follow the procedures when using the machine.
Address: No.393, Jinou Road, Jianghai District, Jiangmen City, Guangdong Province Tel：0750-3332752 Fax：0750-3300023 E-mail：jmmotor@gmail.com jmmotor@jmmotor.cn
Copyright © Jiangmen Jiangling Electric Co., Ltd
粤ICP备15101162号 Powered by 300.cn jiangmen